如何合理地估算线程池大小?

这个问题虽然看起来很小,却并不那么容易回答。大家如果有更好的方法欢迎赐教,先来一个天真的估算方法:假设要求一个系统的TPS(Transaction Per Second或者Task Per Second)至少为20,然后假设每个Transaction由一个线程完成,继续假设平均每个线程处理一个Transaction的时间为4s。那么问题转化为:

如何设计线程池大小,使得可以在1s内处理完20个Transaction?

计算过程很简单,每个线程的处理能力为0.25TPS,那么要达到20TPS,显然需要20/0.25=80个线程。

很显然这个估算方法很天真,因为它没有考虑到CPU数目。一般服务器的CPU核数为16或者32,如果有80个线程,那么肯定会带来太多不必要的线程上下文切换开销。

再来第二种简单的但不知是否可行的方法(N为CPU总核数):

  • 如果是CPU密集型应用,则线程池大小设置为N+1

  • 如果是IO密集型应用,则线程池大小设置为2N+1

如果一台服务器上只部署这一个应用并且只有这一个线程池,那么这种估算或许合理,具体还需自行测试验证。

接下来在这个文档:服务器性能IO优化 中发现一个估算公式:

最佳线程数目 = ((线程等待时间+线程CPU时间)/线程CPU时间 )* CPU数目

比如平均每个线程CPU运行时间为0.5s,而线程等待时间(非CPU运行时间,比如IO)为1.5s,CPU核心数为8,那么根据上面这个公式估算得到:((0.5+1.5)/0.5)*8=32。这个公式进一步转化为:

最佳线程数目 = (线程等待时间与线程CPU时间之比 + 1)* CPU数目

可以得出一个结论:

线程等待时间所占比例越高,需要越多线程。线程CPU时间所占比例越高,需要越少线程。

上一种估算方法也和这个结论相合。

一个系统最快的部分是CPU,所以决定一个系统吞吐量上限的是CPU。增强CPU处理能力,可以提高系统吞吐量上限。但根据短板效应,真实的系统吞吐量并不能单纯根据CPU来计算。那要提高系统吞吐量,就需要从“系统短板”(比如网络延迟、IO)着手:

  • 尽量提高短板操作的并行化比率,比如多线程下载技术

  • 增强短板能力,比如用NIO替代IO

第一条可以联系到Amdahl定律,这条定律定义了串行系统并行化后的加速比计算公式:

加速比=优化前系统耗时 / 优化后系统耗时

加速比越大,表明系统并行化的优化效果越好。Addahl定律还给出了系统并行度、CPU数目和加速比的关系,加速比为Speedup,系统串行化比率(指串行执行代码所占比率)为F,CPU数目为N:

Speedup <= 1 / (F + (1-F)/N)

当N足够大时,串行化比率F越小,加速比Speedup越大。

写到这里,我突然冒出一个问题。

是否使用线程池就一定比使用单线程高效呢?

答案是否定的,比如Redis就是单线程的,但它却非常高效,基本操作都能达到十万量级/s。从线程这个角度来看,部分原因在于:

  • 多线程带来线程上下文切换开销,单线程就没有这种开销

当然“Redis很快”更本质的原因在于:Redis基本都是内存操作,这种情况下单线程可以很高效地利用CPU。而多线程适用场景一般是:存在相当比例的IO和网络操作。

所以即使有上面的简单估算方法,也许看似合理,但实际上也未必合理,都需要结合系统真实情况(比如是IO密集型或者是CPU密集型或者是纯内存操作)和硬件环境(CPU、内存、硬盘读写速度、网络状况等)来不断尝试达到一个符合实际的合理估算值。

最后来一个“Dark Magic”估算方法(因为我暂时还没有搞懂它的原理),使用下面的类:

package pool_size_calculate;

import java.math.BigDecimal;
import java.math.RoundingMode;
import java.util.Timer;
import java.util.TimerTask;
import java.util.concurrent.BlockingQueue;

/**
 * A class that calculates the optimal thread pool boundaries. It takes the
 * desired target utilization and the desired work queue memory consumption as
 * input and retuns thread count and work queue capacity.
 *
 * @author Niklas Schlimm
 *
 */
public abstract class PoolSizeCalculator {

    /**
     * The sample queue size to calculate the size of a single {@link Runnable}
     * element.
     */
    private final int SAMPLE_QUEUE_SIZE = 1000;

    /**
     * Accuracy of test run. It must finish within 20ms of the testTime
     * otherwise we retry the test. This could be configurable.
     */
    private final int EPSYLON = 20;

    /**
     * Control variable for the CPU time investigation.
     */
    private volatile boolean expired;

    /**
     * Time (millis) of the test run in the CPU time calculation.
     */
    private final long testtime = 3000;

    /**
     * Calculates the boundaries of a thread pool for a given {@link Runnable}.
     *
     * @param targetUtilization
     *            the desired utilization of the CPUs (0 <= targetUtilization <=     *            1)     * @param targetQueueSizeBytes   *            the desired maximum work queue size of the thread pool (bytes)     */     protected void calculateBoundaries(BigDecimal targetUtilization,            BigDecimal targetQueueSizeBytes) {      calculateOptimalCapacity(targetQueueSizeBytes);         Runnable task = creatTask();        start(task);        start(task); // warm up phase       long cputime = getCurrentThreadCPUTime();       start(task); // test intervall      cputime = getCurrentThreadCPUTime() - cputime;      long waittime = (testtime * 1000000) - cputime;         calculateOptimalThreadCount(cputime, waittime, targetUtilization);  }   private void calculateOptimalCapacity(BigDecimal targetQueueSizeBytes) {        long mem = calculateMemoryUsage();      BigDecimal queueCapacity = targetQueueSizeBytes.divide(new BigDecimal(              mem), RoundingMode.HALF_UP);        System.out.println("Target queue memory usage (bytes): "                + targetQueueSizeBytes);        System.out.println("createTask() produced "                 + creatTask().getClass().getName() + " which took " + mem               + " bytes in a queue");         System.out.println("Formula: " + targetQueueSizeBytes + " / " + mem);       System.out.println("* Recommended queue capacity (bytes): "                 + queueCapacity);   }   /**      * Brian Goetz' optimal thread count formula, see 'Java Concurrency in   * Practice' (chapter 8.2)   *       * @param cpu    *            cpu time consumed by considered task   * @param wait   *            wait time of considered task   * @param targetUtilization      *            target utilization of the system   */     private void calculateOptimalThreadCount(long cpu, long wait,           BigDecimal targetUtilization) {         BigDecimal waitTime = new BigDecimal(wait);         BigDecimal computeTime = new BigDecimal(cpu);       BigDecimal numberOfCPU = new BigDecimal(Runtime.getRuntime()                .availableProcessors());        BigDecimal optimalthreadcount = numberOfCPU.multiply(targetUtilization)                 .multiply(                      new BigDecimal(1).add(waitTime.divide(computeTime,                              RoundingMode.HALF_UP)));        System.out.println("Number of CPU: " + numberOfCPU);        System.out.println("Target utilization: " + targetUtilization);         System.out.println("Elapsed time (nanos): " + (testtime * 1000000));        System.out.println("Compute time (nanos): " + cpu);         System.out.println("Wait time (nanos): " + wait);       System.out.println("Formula: " + numberOfCPU + " * "                + targetUtilization + " * (1 + " + waitTime + " / "                 + computeTime + ")");       System.out.println("* Optimal thread count: " + optimalthreadcount);    }   /**      * Runs the {@link Runnable} over a period defined in {@link #testtime}.     * Based on Heinz Kabbutz' ideas     * (http://www.javaspecialists.eu/archive/Issue124.html).    *       * @param task   *            the runnable under investigation   */     public void start(Runnable task) {      long start = 0;         int runs = 0;       do {            if (++runs > 5) {
                throw new IllegalStateException("Test not accurate");
            }
            expired = false;
            start = System.currentTimeMillis();
            Timer timer = new Timer();
            timer.schedule(new TimerTask() {
                public void run() {
                    expired = true;
                }
            }, testtime);
            while (!expired) {
                task.run();
            }
            start = System.currentTimeMillis() - start;
            timer.cancel();
        } while (Math.abs(start - testtime) > EPSYLON);
        collectGarbage(3);
    }

    private void collectGarbage(int times) {
        for (int i = 0; i < times; i++) {
            System.gc();
            try {
                Thread.sleep(10);
            } catch (InterruptedException e) {
                Thread.currentThread().interrupt();
                break;
            }
        }
    }

    /**
     * Calculates the memory usage of a single element in a work queue. Based on
     * Heinz Kabbutz' ideas
     * (http://www.javaspecialists.eu/archive/Issue029.html).
     *
     * @return memory usage of a single {@link Runnable} element in the thread
     *         pools work queue
     */
    public long calculateMemoryUsage() {
        BlockingQueue queue = createWorkQueue();
        for (int i = 0; i < SAMPLE_QUEUE_SIZE; i++) {
            queue.add(creatTask());
        }
        long mem0 = Runtime.getRuntime().totalMemory()
                - Runtime.getRuntime().freeMemory();
        long mem1 = Runtime.getRuntime().totalMemory()
                - Runtime.getRuntime().freeMemory();
        queue = null;
        collectGarbage(15);
        mem0 = Runtime.getRuntime().totalMemory()
                - Runtime.getRuntime().freeMemory();
        queue = createWorkQueue();
        for (int i = 0; i < SAMPLE_QUEUE_SIZE; i++) {
            queue.add(creatTask());
        }
        collectGarbage(15);
        mem1 = Runtime.getRuntime().totalMemory()
                - Runtime.getRuntime().freeMemory();
        return (mem1 - mem0) / SAMPLE_QUEUE_SIZE;
    }

    /**
     * Create your runnable task here.
     *
     * @return an instance of your runnable task under investigation
     */
    protected abstract Runnable creatTask();

    /**
     * Return an instance of the queue used in the thread pool.
     *
     * @return queue instance
     */
    protected abstract BlockingQueue createWorkQueue();

    /**
     * Calculate current cpu time. Various frameworks may be used here,
     * depending on the operating system in use. (e.g.
     * http://www.hyperic.com/products/sigar). The more accurate the CPU time
     * measurement, the more accurate the results for thread count boundaries.
     *
     * @return current cpu time of current thread
     */
    protected abstract long getCurrentThreadCPUTime();

}

然后自己继承这个抽象类并实现它的三个抽象方法,比如下面是我写的一个示例(任务是请求网络数据),其中我指定期望CPU利用率为1.0(即100%),任务队列总大小不超过100,000字节:

package pool_size_calculate;

import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.lang.management.ManagementFactory;
import java.math.BigDecimal;
import java.net.HttpURLConnection;
import java.net.URL;
import java.util.concurrent.BlockingQueue;
import java.util.concurrent.LinkedBlockingQueue;

public class SimplePoolSizeCaculatorImpl extends PoolSizeCalculator {

    @Override
    protected Runnable creatTask() {
        return new AsyncIOTask();
    }

    @Override
    protected BlockingQueue createWorkQueue() {
        return new LinkedBlockingQueue(1000);
    }

    @Override
    protected long getCurrentThreadCPUTime() {
        return ManagementFactory.getThreadMXBean().getCurrentThreadCpuTime();
    }

    public static void main(String[] args) {
        PoolSizeCalculator poolSizeCalculator = new SimplePoolSizeCaculatorImpl();
        poolSizeCalculator.calculateBoundaries(new BigDecimal(1.0), new BigDecimal(100000));
    }

}

/**
 * 自定义的异步IO任务
 * @author Will
 *
 */
class AsyncIOTask implements Runnable {

    @Override
    public void run() {
        HttpURLConnection connection = null;
        BufferedReader reader = null;
        try {
            String getURL = "http://baidu.com";
            URL getUrl = new URL(getURL);

            connection = (HttpURLConnection) getUrl.openConnection();
            connection.connect();
            reader = new BufferedReader(new InputStreamReader(
                    connection.getInputStream()));

            String line;
            while ((line = reader.readLine()) != null) {
                // empty loop
            }
        }

        catch (IOException e) {

        } finally {
            if(reader != null) {
                try {
                    reader.close();
                }
                catch(Exception e) {

                }
            }
            connection.disconnect();
        }

    }

}

得到的输出如下:

Target queue memory usage (bytes): 100000
createTask() produced pool_size_calculate.AsyncIOTask which took 40 bytes in a queue
Formula: 100000 / 40
* Recommended queue capacity (bytes): 2500
Number of CPU: 4
Target utilization: 1
Elapsed time (nanos): 3000000000
Compute time (nanos): 47181000
Wait time (nanos): 2952819000
Formula: 4 * 1 * (1 + 2952819000 / 47181000)
* Optimal thread count: 256

推荐的任务队列大小为2500,线程数为256,有点出乎意料之外。我可以如下构造一个线程池:

ThreadPoolExecutor pool =
 new ThreadPoolExecutor(256, 256, 0L, TimeUnit.MILLISECONDS, new LinkedBlockingQueue(2500));

来源:http://ifeve.com/how-to-calculate-threadpool-size/

声明:本站所有文章,如无特殊说明或标注,均为本站原创发布。任何个人或组织,在未征得本站同意时,禁止复制、盗用、采集、发布本站内容到任何网站、书籍等各类媒体平台。如若本站内容侵犯了原著者的合法权益,可联系我们进行处理。

发表回复

您的电子邮箱地址不会被公开。